Hardware

Wood Dock Hardware
Galvanized Structural Steel

[ Home ] [ Docks ] [ Flotation ] [ Boat Lifts ] [ Hardware ] [ Questions ]

Hardware Example

Outside Corner (Female)- has 2-21/2 welded tabs. Use with a male outside corner. Each leg is 10"L x 5" H. P/N 26400 $30.00
Outside Corner (Male)- has one 1/2" welded tab. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set (N) or connector pin (O). Each leg is 10"L x5"H. $26.00
Outside Corner End - use this corner at end of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 10"L x 5"H. P/N 26402 $17.00
Inside Corner - This heavy-duty inside corner should be used with an outside corner. Each leg has elongated holes for easy fit-up and is 8-1/4"L x 6"H $18.00
Inside Corner/Pipe Holder 3"
(P/N 26404) $39.75
Inside Corner/Pipe Holder 2"
(P/N 26405) $34.95
These heavy-duty inside corners should be used with one of the outside corners and has an internal pipe holder to be used with either 2" (P/N 26404) or 1-1/2" pipe
(P/N 26405). Welded gusset gives strength to the dock's frame . Measures 8-1/4"L x 5"H. Requires carriage bolt set (M) for attaching.
Angle- use this heavy-duty angle for all cross supports. Each leg measures 2-1/2"L x 5"H.
P/N 26406 $5.50
Female "T" Connector - has 2-1/2" welded tabs. Bolts to side of dock to attach fingers. Also use for ramps.5"H x 5"L
P/N 26428 $20.00

Male "T" Connector- has 1-1/2" welded tab Use with female T connector to attach fingers and ramps. 5"L x 5"H.
P/N 26432 $14.00
Washer Plate- use two washer plates with each angle. Measures 1-1/2"L x5"H.
P/N 26409
$2.00
Chain Retainer -bolts to the side of dock. use weights and chains to hold dock in place. Accommodates 1/4", 3/8", & 1/2" chain. Measures 5"L x 5"H.
P/N 26410 $23.95 Z - Discontinued
Pipe Holder/Outside 3"- bolts to outside of dock. carriage bolt set (m) required for attaching. Use 2" pipe to hold dock in place.
P/N 26411 $30.95
Lag Bolt set - bolt flat washer hot dipped galvanized used to attach flotation drums to dock system.
P/N 24260 $2.00 ea.
Carriage Bolt Set- used to attach A through K component parts. 1/2" x 3" bolt, flat washer and nut. Hot dipped galvanized.
P/N 26533 $1.50 ea.
3/4" Hex Head Bolt Set- includes lock nut. Used to connect male and female connectors . Galvanized 3/4" x 3-1/2".
P/N 24278 $4.00 ea.
Connector Pin Set- for quick disconnect. Used to connect male and female connectors. Galvanized 3/4" connector pin and hitch clip pin.
P/N 26531 $5.00

Dock hardware is designed for use with 11/2" thick lumber (minimum width 6'). All hardware is mounted with 1/2" carriage bolts (M). All male and female dock to dock connections are made with 3/4" bolts.

All Items Are F.O.B.

Prices Subject to Change Without Notice!

Permafloat Flotation Specs

Model

Size

LBS. Float

Suggested List Price

2448-12
2448-16
2448-20

3648-12
3648-16
3648-20

3672-16
3672-20

4848-12
4848-16
4848-20

4872-12
4872-16
4872-20

4896-12
4896-16
4896-20

2'   x 4' x 12"
2'   x 4' x 16"
2'   x 4' x 20"

3'   x 4' x 12"
3'   x 4' x 16"
3'   x 4' x 20"

3' x 6' x 16"
3' x 6' x 20"

4'   x 4' x 12"
4'   x 4' x 16"
4'   x 4' x 20"

4'   x 6' x 12"
4'   x 6' x 16"
4'   x 6' x 20"

4'   x 8' x 12"
4'   x 8' x 16"
4'   x 8' x 20"

450
604
759

679
911
1143

1373
1716

908
1217
1526

1362
1828
2295

1816
2278
3057

$115.00
$135.00
$158.00

$155.00
$175.00
$199.00

$250.00
$275.00

$180.00
$195.00
$240.00

$258.00
$290.00
$330.00

$350.00
$390.00
$440.00

Volume Discounts Available

[ Home ] [ Docks ] [ Flotation ] [ Boat Lifts ] [ Hardware ] [ Questions ]

Docks 'N Stuff, Inc.
103 Midway Lane
Oak Ridge, TN
37830

phone: (865) 483-3010

e-mail:

carol@docksnstuff.com